1.00" ‐ 6.00" diameter in 1.00" increments for outside jaws and 1/2" to 4 1/2" inside jaws . Case hardened, stabilized, ground and lapped to +/‐.0002". Vernier masters are used to calibrate vernier calipers. The master is superior to gage blocks calibration because they do not require block stacks so it is much faster to inspect the linear range of the tool. In addition they indicate wear on the caliper anvils because both the I.D. and O.D. jaws are inspected wihout additional setup.
|VC-1E-English||Vernier Caliper Masters||1.00" to 6.00" in 1.00" increments for outside jaws. .500 to 4.500" for inside jaws. Tolerance is +/- .0002".||
|VC-1M-Metric||Vernier Caliper Masters||25.00mm to 150mm in 25.00mm increments for outside jaws. 12.50mm to 112.50" for inside jaws. Tolerance is +/- .005mm.||