Precision Gage Calibration Systems – MIC TRAC™ 4000

Establishing an in-house calibration service represents an investment in facilities, equipment and trained personnel but grants you TOTAL control over all of your calibration process as well as saves you time and money over the long term. The Gagemaker In-House MIC TRAC™ 4000 Series Precision Gage Calibration System enables you to inspect parts, calibrate and track a wide variety of gage styles, including ring and plugs. This innovative high precision metrology system with 1.00″ travel guarantees extremely high accuracies to ±.00005 and a resolution of .00001″ (traceable to the NIST appropriate national standard). This system also enables you to track and maintain gage history as well as produces calibration certificates.

Thread Check has a team of technical experts that are ready to help you with all your gauging and measurement requirements. Contact us via email at info@threadcheck.com or call us at 800 767 7633

Available Precision Gage Calibration Systems – MIC TRAC™ 4000

Set Descending Direction
per page
  1. Gagemaker - 50 In-Lb Torque Wrench With 5/32" Hex Wrench Adapter
    Gagemaker - 50 In-Lb Torque Wrench With 5/32" Hex Wrench Adapter
    50 in-lb torque wrench with 5/32" hex wrench adapter More Info
  2. Gagemaker - Adjustable Height Support Table, X-Axis & Y-Axis Support Base
    Gagemaker - Adjustable Height Support Table, X-Axis & Y-Axis Support Base
    Adjustable height support table, X-axis & Y-axis support base More Info
  3. Gagemaker - Digital Readout Software Module With Digital Data Acquisition Card W/ Certifi(Tm)
    Gagemaker - Digital Readout Software Module With Digital Data Acquisition Card W/ Certifi(Tm)
    Digital readout software module with digital data acquisition card w/ CERTIFI(Tm) More Info
  4. Gagemaker - Flat Face, T-Shaped Setting Blocks To Accept Riser Block
    Gagemaker - Flat Face, T-Shaped Setting Blocks To Accept Riser Block
    Flat face t-shaped setting blocks to accept riser block More Info
  5. Gagemaker - 6-20 Pitch 60Deg "V" Thread (Un Series) Setting Blocks, Set Of 2
    Gagemaker - 6-20 Pitch 60Deg "V" Thread (Un Series) Setting Blocks, Set Of 2
    6-20 pitch 60deg "V" thread (UN Series) setting blocks set of 2 More Info
  6. Gagemaker - 3-5 Pitch 60Deg "V" Thread (Un Series) Setting Blocks, Set Of 2
    Gagemaker - 3-5 Pitch 60Deg "V" Thread (Un Series) Setting Blocks, Set Of 2
    3-5 pitch 60deg "V" thread (UN Series) setting blocks set of 2 More Info
  7. Gagemaker - 23Deg Bxr Ring Groove Diameter/Width Setting Blocks, Used With Bx-1000 Gages, Set Of 2
    Gagemaker - 23Deg Bxr Ring Groove Diameter/Width Setting Blocks, Used With Bx-1000 Gages, Set Of 2
    23deg BXR Ring Groove Diameter/Width Setting Blocks used with BX-1000 gages set of 2 More Info
  8. Gagemaker - Flat Face Setting Blocks, No Taper (Supplied With Mic Trac(Tm))
    Gagemaker - Flat Face Setting Blocks, No Taper (Supplied With Mic Trac(Tm))
    Flat Face Setting Blocks No taper (supplied with MIC TRAC(tm)) More Info
  9. Gagemaker - Flat Face Setting Blocks, 1.000" Outside Diameter
    Gagemaker - Flat Face Setting Blocks, 1.000" Outside Diameter
    Flat Face Setting Blocks 1.000" outside diameter More Info
  10. Gagemaker - Tapered Setting Blocks 45Deg Half Angle, Set Of 2
    Gagemaker - Tapered Setting Blocks 45Deg Half Angle, Set Of 2
    Tapered Setting Blocks 45deg half angle set of 2 More Info
  11. Gagemaker - Tapered Setting Blocks 30Deg Half Angle, Set Of 2
    Gagemaker - Tapered Setting Blocks 30Deg Half Angle, Set Of 2
    Tapered Setting Blocks 30deg half angle set of 2 More Info
  12. Gagemaker - Tapered Setting Blocks 20Deg Half Angle, Set Of 2
    Gagemaker - Tapered Setting Blocks 20Deg Half Angle, Set Of 2
    Tapered Setting Blocks 20deg half angle set of 2 More Info
  13. Gagemaker - Tapered Setting Blocks 15Deg Half Angle, Set Of 2
    Gagemaker - Tapered Setting Blocks 15Deg Half Angle, Set Of 2
    Tapered Setting Blocks 15deg half angle, set of 2 More Info
  14. Gagemaker - Tapered Setting Blocks 10Deg Half Angle, Set Of 2
    Gagemaker - Tapered Setting Blocks 10Deg Half Angle, Set Of 2
    Tapered Setting Blocks 10deg half angle, set of 2 More Info
  15. Gagemaker - For Vertically Holding Gage Pins .062" - .750"
    Gagemaker - For Vertically Holding Gage Pins .062" - .750"
    For vertically holding gage pins .062" - .750" More Info
  16. Gagemaker - For Vertically Holding Gage Pins .062" - .500"
    Gagemaker - For Vertically Holding Gage Pins .062" - .500"
    For vertically holding gage pins .062" - .500" More Info
  17. Gagemaker - Internal Threaded Ring Arm P.D. Module (For Solid Threaded Ring Gages). Contains Ball Contacts And Holders For 6, 8, 10, 12, 14, 16, 18, And 20 Pitch 60Deg Threads (Diameter Range 1.500" & Larger)
    Gagemaker - Internal Threaded Ring Arm P.D. Module (For Solid Threaded Ring Gages). Contains Ball Contacts And Holders For 6, 8, 10, 12, 14, 16, 18, And 20 Pitch 60Deg Threads (Diameter Range 1.500" & Larger)
    Internal threaded ring arm P.D. module (for solid threaded ring gages). Contains ball contacts and holders for 6, 8, 10, 12, 14, 16, 18, and 20 pitch 60deg threads (Diameter range 1.500" & Larger) More Info
  18. Gagemaker - Set Of 3 Fixtures For Measuring Cylindrical Ring Gages And Bores. Cr-1 (.170"-.249"), Cr-2 (.250"-.879"), Cr-3 (.880"- Larger)
    Gagemaker - Set Of 3 Fixtures For Measuring Cylindrical Ring Gages And Bores. Cr-1 (.170"-.249"), Cr-2 (.250"-.879"), Cr-3 (.880"- Larger)
    Set of 3 fixtures for measuring cylindrical ring gages and bores. CR-1 (.170"-.249"), CR-2 (.250"-.879"), CR-3 (.880"- Larger) More Info
  19. Gagemaker - Calibration Reference Cards: Complete Procedural Documentation For The Calibration Of Handheld Inspection Equipment Including: O.D. & I.D. Micrometers, Calipers, Depth Micrometers, And More
    Gagemaker - Calibration Reference Cards: Complete Procedural Documentation For The Calibration Of Handheld Inspection Equipment Including: O.D. & I.D. Micrometers, Calipers, Depth Micrometers, And More
    Calibration Reference Cards: Complete procedural documentation for the calibration of handheld inspection equipment including: O.D. & I.D. micrometers calipers depth micrometers and more More Info
  20. Gagemaker - "V" Blocks For Calibration Of Axial Travel Probes And Bore Gages
    Gagemaker - "V" Blocks For Calibration Of Axial Travel Probes And Bore Gages
    "V" blocks for calibration of axial travel probes and bore gages More Info
  21. Gagemaker - "V" Block Calibration Fixture For Gagemaker's Internal Thread Height Gages And Mrp-2000 Series Upper Arms*
    Gagemaker - "V" Block Calibration Fixture For Gagemaker's Internal Thread Height Gages And Mrp-2000 Series Upper Arms*
    "V" block calibration fixture for Gagemaker's internal thread height gages and MRP-2000 Series upper arms* More Info
  22. Gagemaker - "V" Support Accessory For Calibrating Micrometers And Standards**
    Gagemaker - "V" Support Accessory For Calibrating Micrometers And Standards**
    "V" support accessory for calibrating micrometers and standards** More Info
  23. Gagemaker - Straight Support Accessory For Support Of Extended Probes*
    Gagemaker - Straight Support Accessory For Support Of Extended Probes*
    Straight support accessory for support of extended probes* More Info
  24. Gagemaker - Gagemaker Lead Gage (Lg-5003) Calibration Fixture*
    Gagemaker - Gagemaker Lead Gage (Lg-5003) Calibration Fixture*
    Gagemaker lead gage (LG-5003) calibration fixture* More Info
  25. Gagemaker - Calibration Fixture For Both Gagemaker And Allen Lead Gages
    Gagemaker - Calibration Fixture For Both Gagemaker And Allen Lead Gages
    Calibration fixture for both Gagemaker and Allen lead gages More Info
  26. Gagemaker - AGD Dial Indicator, Calibration Fixture (Includes .375" And 8Mm Bushing)
    Gagemaker - AGD Dial Indicator, Calibration Fixture (Includes .375" And 8Mm Bushing)
    AGD dial indicator Calibration fixture (includes .375" and 8mm bushing) More Info
  27. Gagemaker - Universal Clamping Fixture For Calibration Of Indicators And Gages*
    Gagemaker - Universal Clamping Fixture For Calibration Of Indicators And Gages*
    Universal clamping fixture for calibration of indicators and gages* More Info
  28. Gagemaker - Caliper Calibration Accessory Dial, Digital And Vernier Calipers. Includes Tf-Sa Support Arm
    Gagemaker - Caliper Calibration Accessory Dial, Digital And Vernier Calipers. Includes Tf-Sa Support Arm
    Caliper calibration accessory dial digital and vernier calipers. Includes TF-SA support arm More Info
  29. Gagemaker - Base Support Plate For Setting Dial Bore Gages**
    Gagemaker - Base Support Plate For Setting Dial Bore Gages**
    Base support plate for setting dial bore gages** More Info
  30. Gagemaker - Base Support Block For Setting Dial Bore Gages**
    Gagemaker - Base Support Block For Setting Dial Bore Gages**
    Base support block for setting dial bore gages** More Info
  31. Gagemaker - Flat Face Setting Block Set (2 Blocks) 1.5000" Outside Diameter
    Gagemaker - Flat Face Setting Block Set (2 Blocks) 1.5000" Outside Diameter
    Flat face setting block set (2 blocks) 1.5000" outside diameter More Info
  32. Gagemaker - Calibration Fixture Package Includes: Tf-1F, Tf-Ca, Tf-Dg, Tf-Ind, Tf-Lg-2, Tf-Lg-3, Tf-Sa, Tf-Ss, Tf-Sv, Tf-Vb, Tf-Vn, And Storage Case
    Gagemaker - Calibration Fixture Package Includes: Tf-1F, Tf-Ca, Tf-Dg, Tf-Ind, Tf-Lg-2, Tf-Lg-3, Tf-Sa, Tf-Ss, Tf-Sv, Tf-Vb, Tf-Vn, And Storage Case
    Calibration Fixture Package Includes: TF-1F TF-CA TF-DG TF-IND TF-LG-2 TF-LG-3 TF-SA TF-SS TF-SV TF-VB TF-VN and storage case More Info
  33. Gagemaker - Mic Trac(Tm) 4000 Base Unit, 0" - 48", With Computer, Software, Tf-2R Setting Blocks, And Shipping Carton
    Gagemaker - Mic Trac(Tm) 4000 Base Unit, 0" - 48", With Computer, Software, Tf-2R Setting Blocks, And Shipping Carton
    MIC TRAC(tm) 4000 base unit - 0" - 12" with compute software TF-2R setting blocks and shipping carton More Info
  34. Gagemaker - Mic Trac(Tm) 4000 Base Unit, 0" - 36", With Computer, Software, Tf-2R Setting Blocks, And Shipping Carton
    Gagemaker - Mic Trac(Tm) 4000 Base Unit, 0" - 36", With Computer, Software, Tf-2R Setting Blocks, And Shipping Carton
    MIC TRAC(tm) 4000 base unit - 0" - 12" with computer software TF-2R setting blocks and shipping carton More Info
  35. Gagemaker - Mic Trac(Tm) 4000 Base Unit, 0" - 24", With Computer, Software, Tf-2R Setting Blocks, And Shipping Carton
    Gagemaker - Mic Trac(Tm) 4000 Base Unit, 0" - 24", With Computer, Software, Tf-2R Setting Blocks, And Shipping Carton
    MIC TRAC(tm) 4000 base unit - 0" - 12" - with computer software TF-2R setting blocks and shipping carton More Info
  36. Gagemaker - Mic Trac(Tm) 4000 Base Unit, 0" - 12", With Computer, Software, Tf-2R Setting Blocks, And Shipping Carton
    Gagemaker - Mic Trac(Tm) 4000 Base Unit, 0" - 12", With Computer, Software, Tf-2R Setting Blocks, And Shipping Carton
    MIC TRAC(tm) 4000 base unit, 0" - 12" - with computer - software - TF-2R setting blocks and shipping carton More Info
  37. Gagemaker - 48" Precision Calibration Package with MT-4048-10 MIC TRAC(tm)
    Gagemaker - 48" Precision Calibration Package with MT-4048-10 MIC TRAC(tm)
    48" Precision Calibration Package with MT-4012-10 MIC TRAC(tm) More Info
  38. Gagemaker - 36" Precision Calibration Package with MT-4036-10 MIC TRAC(tm)
    Gagemaker - 36" Precision Calibration Package with MT-4036-10 MIC TRAC(tm)
    36" Precision Calibration Package with MT-4012-10 MIC TRAC(tm) More Info
  39. Gagemaker - 24" Precision Calibration Package with MT-4024-10 MIC TRAC(tm)
    Gagemaker - 24" Precision Calibration Package with MT-4024-10 MIC TRAC(tm)
    24" Precision Calibration Package with MT-4012-10 MIC TRAC(tm) More Info
  40. Gagemaker - 12" Precision Calibration Package with MT-4012-10 MIC TRAC(tm)
    Gagemaker - 12" Precision Calibration Package with MT-4012-10 MIC TRAC(tm)
    12" Precision Calibration Package with MT-4012-10 MIC TRAC(tm) More Info
Set Descending Direction
per page
By clicking "I Agree", you agree to our Terms and that you have read our Data Use Policy.