Thread Check Inc. offers a full range of Gagemaker PD 6000 Series internal pitch diameter gages to verify that part pitch diameter is within specification. Gagemaker PD 6000 series gages measure the pitch diameter internal threads.
Pitch diameter is the most important characteristic on a thread because it reflects the widest spectrum of possible defects. An out of tolerance pitch diameter can compromise the load capacity of a threaded component. Pitch diameter is perhaps the most important element with regards to whether two parts will screw together. Pitch diameter is the distance from the pitch line to the corresponding pitch line located 180 degrees around.
The Gagemaker PD 6000, PD 6001, and PD 6002 gages are adjustable within a wide size range from 1 1/2 inches to 27 inches and use interchangeable contact points to measure different pitch threads. Setting dimensions for the PD gages are generated with the TDWIN Thread Disk software. Gages require setting with either a MIC TRAC™ or other means (i.e. gauge blocks, micrometer, standard, etc.). Rod style standards are available. Software, MIC TRAC™, and contact points are sold separately.
Internal PD gages can measure P.D. on diameters from 1 1/2 up to 27" with 3 frames.
Contact points are available for a range of threads and pitch sizes including UN series, Metric series, Acme, Stub Acme, 7x45 Buttress, and trapezoidal threads.
The Gagemaker PD 6000 Series ball contact pitch diameter gage is accurate, versatile, and economical.
Thread Check has a team of technical experts that are ready to help you with all your gauging and measurement requirements. Contact us via email at firstname.lastname@example.org or call us at 800 767 7633