Gage Setting and Part Measurement Systems – MIC TRAC 3000

Employing a versatile bench mounted length measuring system allows you to measure parts, calibrate hand held gages, and preset indicator style gages. The Gagemaker Shop Floor MIC TRAC™ Gage Setting and Part Measurement System (MT-3000 Series) sets or zeros most gages with the standard resolution of .00005″, accuracies ranging from ±.0001″ to ±.0004″ (traceable to the NIST) and the digital read out is CE approved. The cost effective Force-Lok™ feature improves repeatability from operator to operator and is well suited for a variety of environments including the shop floor.

The MIC TRAC™ System is an electronic, adjustable calibration and measurement center that will inspect parts, preset indicator style gages, and calibrate a variety of hand held inspection gages. The MIC TRAC 3000 System (MT-3000) is suited for use nearly anywhere, on a shop floor to a calibration lab.

The MIC TRAC™ System contains receiver pads, which are precision ground in matched sets, and used as parallel surfaces for measuring or holding fixtures. The MT-3000’s digital readout (DRO) displays measurement readings in inch or metric.*

The MT-3000 measurement system includes the base unit, which houses the optical scale and provides the system’s precision measuring capability. The base unit may include an optional Force-Lok™ feature that provides a constant measurement force, which improves repeatability from operator to operator. A computer may be substituted for the system’s digital readout unit (DRO). This computer comes pre-installed with our CERTIFI™ Gage Calibration software and our TDWin™ Thread Engineering software.

For gage calibration, the optional CAL-PAK fixture package can be included with any MIC TRAC™ system. The CAL-PAK is an assortment of fixtures that attach to the base unit for holding gages securely during the calibration process. Proper positioning of the gage improves the accuracy of the calibration and provides more consistent results.

To help you with your decision process, we’ve created a quick and easy Return on Investment Calculator based on one of our most popular MT-3000 calibration bundles (a MT-3012F-50-USBC and a CAL-PAK fixture set) and the number of calibrations (each instance of each gage) you do per year below.

Thread Check has a team of technical experts that are ready to help you with all your gauging and measurement requirements. Contact us via email at info@threadcheck.com or call us at 800 767 7633
 

 Shopping/Quote Cart coming soon for these products

Available Gage Setting and Part Measurement Systems – MIC TRAC 3000

Set Descending Direction
per page
  1. Gagemaker - Mic Trac(Tm) Computer Upgrade: Digital Readout Software Module With Digital Data Card, And Desktop Pc With Certifi(Tm) & Tdwin(Tm). Mic Trac(Tm) Unit Must Be Sent To Us For Computer Upgrade.
    Gagemaker - Mic Trac(Tm) Computer Upgrade: Digital Readout Software Module With Digital Data Card, And Desktop Pc With Certifi(Tm) & Tdwin(Tm). Mic Trac(Tm) Unit Must Be Sent To Us For Computer Upgrade.
    MIC TRAC(tm) Computer upgrade: digital readout software module with digital data card, and desktop PC with CERTIFI(tm) & TDWin(tm). MIC TRAC(tm) unit must be sent to us for computer upgrade. More Info
  2. Gagemaker - Calibration Reference Cards: Complete Procedural Documentation For The Calibration Of Handheld Inspection Equipment Including: O.D. & I.D. Micrometers, Calipers, Depth Micrometers, And More
    Gagemaker - Calibration Reference Cards: Complete Procedural Documentation For The Calibration Of Handheld Inspection Equipment Including: O.D. & I.D. Micrometers, Calipers, Depth Micrometers, And More
    Calibration Reference Cards: Complete procedural documentation for the calibration of handheld inspection equipment including: O.D. & I.D. micrometers calipers depth micrometers and more More Info
  3. Gagemaker - 3/4" Tapered Setting Blocks, 8 & 10 Round, 3/4" Tpf Buttress, Line Pipe
    Gagemaker - 3/4" Tapered Setting Blocks, 8 & 10 Round, 3/4" Tpf Buttress, Line Pipe
    3/4" Tapered Setting Blocks 8 & 10 Round 3/4" TPF Buttress Line Pipe More Info
  4. Gagemaker - MIC TRAC(tm) 60" High Resolution Force-Lok Unit with a Computer and MT-4-USB
    Gagemaker - MIC TRAC(tm) 60" High Resolution Force-Lok Unit with a Computer and MT-4-USB
    MIC TRAC(tm) 48" High Resolution Force-Lok Unit with a Computer and MT-4-USB More Info
  5. Gagemaker - MIC TRAC(tm) 48" High Resolution Force-Lok Unit with a Computer and MT-4-USB
    Gagemaker - MIC TRAC(tm) 48" High Resolution Force-Lok Unit with a Computer and MT-4-USB
    MIC TRAC(tm) 12" High Resolution Force-Lok Unit with a Computer and MT-4-USB More Info
  6. Gagemaker - MIC TRAC(tm) 36" High Resolution Force-Lok Unit with a Computer and MT-4-USB
    Gagemaker - MIC TRAC(tm) 36" High Resolution Force-Lok Unit with a Computer and MT-4-USB
    MIC TRAC(tm) 12" High Resolution Force-Lok Unit with a Computer and MT-4-USB More Info
  7. Gagemaker - MIC TRAC(tm) 24" High Resolution Force-Lok Unit with a Computer and MT-4-USB
    Gagemaker - MIC TRAC(tm) 24" High Resolution Force-Lok Unit with a Computer and MT-4-USB
    MIC TRAC(tm) 12" High Resolution Force-Lok Unit with a Computer and MT-4-USB More Info
  8. Gagemaker - MIC TRAC(tm) 12" High Resolution Force-Lok Unit with a Computer and MT-4-USB
    Gagemaker - MIC TRAC(tm) 12" High Resolution Force-Lok Unit with a Computer and MT-4-USB
    MIC TRAC(tm) 12" High Resolution Force-Lok Unit with a Computer and MT-4-USB More Info
  9. Gagemaker - MIC TRAC(tm) 48" Force-Lok Unit with a Computer and MT-4-USB
    Gagemaker - MIC TRAC(tm) 48" Force-Lok Unit with a Computer and MT-4-USB
    MIC TRAC(tm) 48" Force-Lok Unit with a Computer and MT-4-USB More Info
  10. Gagemaker - MIC TRAC(tm) 36" Force-Lok Unit with a Computer and MT-4-USB
    Gagemaker - MIC TRAC(tm) 36" Force-Lok Unit with a Computer and MT-4-USB
    MIC TRAC(tm) 36" Force-Lok Unit with a Computer and MT-4-USB More Info
  11. Gagemaker - MIC TRAC(tm) 24" Force-Lok Unit with a Computer and MT-4-USB
    Gagemaker - MIC TRAC(tm) 24" Force-Lok Unit with a Computer and MT-4-USB
    MIC TRAC(tm) 24" Force-Lok Unit with a Computer and MT-4-USB More Info
  12. Gagemaker - MIC TRAC(tm) 12" Force-Lok Unit with a Computer and MT-4-USB
    Gagemaker - MIC TRAC(tm) 12" Force-Lok Unit with a Computer and MT-4-USB
    MIC TRAC(tm) 12" Force-Lok Unit with a Computer and MT-4-USB More Info
  13. Gagemaker - 50 In-Lb Torque Wrench With 5/32" Hex Wrench Adapter
    Gagemaker - 50 In-Lb Torque Wrench With 5/32" Hex Wrench Adapter
    50 in-lb torque wrench with 5/32" hex wrench adapter More Info
  14. Gagemaker - Adjustable Height Support Table, X-Axis & Y-Axis Support Base
    Gagemaker - Adjustable Height Support Table, X-Axis & Y-Axis Support Base
    Adjustable height support table, X-axis & Y-axis support base More Info
  15. Gagemaker - Digital Readout Software Module With Digital Data Acquisition Card W/ Certifi(Tm)
    Gagemaker - Digital Readout Software Module With Digital Data Acquisition Card W/ Certifi(Tm)
    Digital readout software module with digital data acquisition card w/ CERTIFI(Tm) More Info
  16. Gagemaker - Flat Face, T-Shaped Setting Blocks To Accept Riser Block
    Gagemaker - Flat Face, T-Shaped Setting Blocks To Accept Riser Block
    Flat face t-shaped setting blocks to accept riser block More Info
  17. Gagemaker - 6-20 Pitch 60Deg "V" Thread (Un Series) Setting Blocks, Set Of 2
    Gagemaker - 6-20 Pitch 60Deg "V" Thread (Un Series) Setting Blocks, Set Of 2
    6-20 pitch 60deg "V" thread (UN Series) setting blocks set of 2 More Info
  18. Gagemaker - 3-5 Pitch 60Deg "V" Thread (Un Series) Setting Blocks, Set Of 2
    Gagemaker - 3-5 Pitch 60Deg "V" Thread (Un Series) Setting Blocks, Set Of 2
    3-5 pitch 60deg "V" thread (UN Series) setting blocks set of 2 More Info
  19. Gagemaker - 23Deg Bxr Ring Groove Diameter/Width Setting Blocks, Used With Bx-1000 Gages, Set Of 2
    Gagemaker - 23Deg Bxr Ring Groove Diameter/Width Setting Blocks, Used With Bx-1000 Gages, Set Of 2
    23deg BXR Ring Groove Diameter/Width Setting Blocks used with BX-1000 gages set of 2 More Info
  20. Gagemaker - Flat Face Setting Blocks, No Taper (Supplied With Mic Trac(Tm))
    Gagemaker - Flat Face Setting Blocks, No Taper (Supplied With Mic Trac(Tm))
    Flat Face Setting Blocks No taper (supplied with MIC TRAC(tm)) More Info
  21. Gagemaker - Flat Face Setting Blocks, 1.000" Outside Diameter
    Gagemaker - Flat Face Setting Blocks, 1.000" Outside Diameter
    Flat Face Setting Blocks 1.000" outside diameter More Info
  22. Gagemaker - Tapered Setting Blocks 45Deg Half Angle, Set Of 2
    Gagemaker - Tapered Setting Blocks 45Deg Half Angle, Set Of 2
    Tapered Setting Blocks 45deg half angle set of 2 More Info
  23. Gagemaker - Tapered Setting Blocks 30Deg Half Angle, Set Of 2
    Gagemaker - Tapered Setting Blocks 30Deg Half Angle, Set Of 2
    Tapered Setting Blocks 30deg half angle set of 2 More Info
  24. Gagemaker - Tapered Setting Blocks 20Deg Half Angle, Set Of 2
    Gagemaker - Tapered Setting Blocks 20Deg Half Angle, Set Of 2
    Tapered Setting Blocks 20deg half angle set of 2 More Info
  25. Gagemaker - Tapered Setting Blocks 15Deg Half Angle, Set Of 2
    Gagemaker - Tapered Setting Blocks 15Deg Half Angle, Set Of 2
    Tapered Setting Blocks 15deg half angle, set of 2 More Info
  26. Gagemaker - Tapered Setting Blocks 10Deg Half Angle, Set Of 2
    Gagemaker - Tapered Setting Blocks 10Deg Half Angle, Set Of 2
    Tapered Setting Blocks 10deg half angle, set of 2 More Info
  27. Gagemaker - "V" Blocks For Calibration Of Axial Travel Probes And Bore Gages
    Gagemaker - "V" Blocks For Calibration Of Axial Travel Probes And Bore Gages
    "V" blocks for calibration of axial travel probes and bore gages More Info
  28. Gagemaker - "V" Block Calibration Fixture For Gagemaker's Internal Thread Height Gages And Mrp-2000 Series Upper Arms*
    Gagemaker - "V" Block Calibration Fixture For Gagemaker's Internal Thread Height Gages And Mrp-2000 Series Upper Arms*
    "V" block calibration fixture for Gagemaker's internal thread height gages and MRP-2000 Series upper arms* More Info
  29. Gagemaker - "V" Support Accessory For Calibrating Micrometers And Standards**
    Gagemaker - "V" Support Accessory For Calibrating Micrometers And Standards**
    "V" support accessory for calibrating micrometers and standards** More Info
  30. Gagemaker - Straight Support Accessory For Support Of Extended Probes*
    Gagemaker - Straight Support Accessory For Support Of Extended Probes*
    Straight support accessory for support of extended probes* More Info
  31. Gagemaker - Gagemaker Lead Gage (Lg-5003) Calibration Fixture*
    Gagemaker - Gagemaker Lead Gage (Lg-5003) Calibration Fixture*
    Gagemaker lead gage (LG-5003) calibration fixture* More Info
  32. Gagemaker - Calibration Fixture For Both Gagemaker And Allen Lead Gages
    Gagemaker - Calibration Fixture For Both Gagemaker And Allen Lead Gages
    Calibration fixture for both Gagemaker and Allen lead gages More Info
  33. Gagemaker - AGD Dial Indicator, Calibration Fixture (Includes .375" And 8Mm Bushing)
    Gagemaker - AGD Dial Indicator, Calibration Fixture (Includes .375" And 8Mm Bushing)
    AGD dial indicator Calibration fixture (includes .375" and 8mm bushing) More Info
  34. Gagemaker - Universal Clamping Fixture For Calibration Of Indicators And Gages*
    Gagemaker - Universal Clamping Fixture For Calibration Of Indicators And Gages*
    Universal clamping fixture for calibration of indicators and gages* More Info
  35. Gagemaker - Caliper Calibration Accessory Dial, Digital And Vernier Calipers. Includes Tf-Sa Support Arm
    Gagemaker - Caliper Calibration Accessory Dial, Digital And Vernier Calipers. Includes Tf-Sa Support Arm
    Caliper calibration accessory dial digital and vernier calipers. Includes TF-SA support arm More Info
  36. Gagemaker - Base Support Plate For Setting Dial Bore Gages**
    Gagemaker - Base Support Plate For Setting Dial Bore Gages**
    Base support plate for setting dial bore gages** More Info
  37. Gagemaker - Base Support Block For Setting Dial Bore Gages**
    Gagemaker - Base Support Block For Setting Dial Bore Gages**
    Base support block for setting dial bore gages** More Info
  38. Gagemaker - Flat Face Setting Block Set (2 Blocks) 1.5000" Outside Diameter
    Gagemaker - Flat Face Setting Block Set (2 Blocks) 1.5000" Outside Diameter
    Flat face setting block set (2 blocks) 1.5000" outside diameter More Info
  39. Gagemaker - Calibration Fixture Package Includes: Tf-1F, Tf-Ca, Tf-Dg, Tf-Ind, Tf-Lg-2, Tf-Lg-3, Tf-Sa, Tf-Ss, Tf-Sv, Tf-Vb, Tf-Vn, And Storage Case
    Gagemaker - Calibration Fixture Package Includes: Tf-1F, Tf-Ca, Tf-Dg, Tf-Ind, Tf-Lg-2, Tf-Lg-3, Tf-Sa, Tf-Ss, Tf-Sv, Tf-Vb, Tf-Vn, And Storage Case
    Calibration Fixture Package Includes: TF-1F TF-CA TF-DG TF-IND TF-LG-2 TF-LG-3 TF-SA TF-SS TF-SV TF-VB TF-VN and storage case More Info
Set Descending Direction
per page
By clicking "I Agree", you agree to our Terms and that you have read our Data Use Policy.