Thread Measuring Wires Inch

Thread Check, Inc. offers a complete range of certified 60° inch thread measuring wires. The 60° inch wires are available from 2 tpi to 120 tpi. All wire sets are supplied within .000020" of the best wire size. All thread measuring wires are calibrated within .000005" of the size provided on the label. Commonality of the 3 wires is with .000010" and roundness within .000010". Thread measuring wires are supplied with a minimum hardness of Rc. 62.5. Thread measuring wires meet or exceed ANSI/ASME B1.2, B1.16M and ANSI/ASME and ASME B89.1.17‐2001. Thread Check Inc. can supply wires and technical support for many modified and special threads including trapezoidal threads and buttress threads.

Technical Information

Additional Information

Certified Thread Measuring Wires

P.D. = Pitch Diameter
M = Measurement over wires
W = Wire diameter
C = Constant
C = .86603 x Pitch (inches) -3W
P.D. = M-C
W = .57735 x

Thread Measuring Wires

Tolerance and specifications:

  • within .000020" of best wire diameter for specified tpi.
  • within .000005" of the calibrated size provided on label.
  • have the same diameter within .000010".
  • roundness within .000010".
  • taper does not exceed .000010".
  • standard 2" lengths.
  • minimum hardness of RC 62.5.
  • surface finish lapped, 1 MU AA.
  • traceable to NIST.
  • wires meet or exceed national standard ANSI/ASME B1.2, ANSI/ASME B1.16M, and ASME B89.1.17-2001.

Use of best size wires

In measuring screw threads it is desirable to use wires which touch the thread at or near the pitch diameter for the reason that with such "Best Size" wires the measurement of pitch diameter is least effected by an error in the included angle of thread.

Certified Thread Measuring Wires

Notes: Maximum and minimum wires should be used which are safely within the limiting dimensions given by the above formulas.

Call for information and pricing of special wire diameters including Whitworth, British Association, Buttress and worm threads.

Root Diameter Wires:
60° and 55° threads from 41/2-64 TPI.
Price per set of 3 wires.
Call for prices.

By clicking "I Agree", you agree to our Terms and that you have read our Data Use Policy.