Pg Conduit Thread Plug Gages

Pg Steel Conduit Thread Plug Gages per DIN 40431

The Steel Conduit Thread Plug gauges are manufactured per DIN 40431.

The Pg thread series is designed specifically for the thin wall cross section of the steel conduit. The thin wall thickness requires a shorter profile thread that will not break through the outside diameter of the steel conduit during the machining process. The Pg conduit thread form features an 80° included angle and a shorter profile than the 60° included angle found in the Unified National thread series and the Metric thread series.

The DIN 40431 standard for P1 steel conduit threads specifies the requirements for using Go thread plug gages and plain NoGo plug gages to inspect the conduit threads. The plain NoGo plug gage checks the minor diameter or crest of the thread and verifies that minimum material condition is met. The Go threaded plug works normally by ensuring the maximum material condition is met.

Using the Pg Thread Plug Gages:

The Go threaded plug gage must be capable of being screwed by hand without undue force over the full length of the threaded work piece.

The NoGo plain plug gage must not be able to pass over the threaded work piece.

All Pg Thread Gages in include Long Form Calibration.

Pg 11 Go/No Go Thread Plug Gage w/handleSteel Conduit Thread Plug Gage per DIN 40431