Mahr Pocket Surf Portable Surface Roughness Gage - 10 μm radius - PMD-90101 Certified Specimen

A Pocket Surf Kit is furnished complete in a fitted case, and includes a Pocket Surf unit with a General Purpose Probe** and a 3.2 μm/ 125 μinch (nominal) Reference Specemin **, 9 Volt Battery Riser Plate and screwdriver. This individual kit includes a Probe, 90°, 10 μm radius, PMD‐90101 Certified Specimen , and Test Certificate.

Features:

• Pocket‐sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory.
• Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging.
• Can be used to measure any one of four, switch‐selectable, parameters: Ra , Rmax/Ry , Rz.
• Selectable traverse length 1, 3 or 5 cut‐offs of 0.8 mm/.030 in.
• Operates in any position ‐ horizontal, vertical, and upside down
• Easy‐to‐read LCD readout presents the measured roughness value, in microinches or micrometers,
  within half a second after the surface is traversed.
• Out‐of‐range (high or low) and "battery low" signals are also displayed.
• Four switchable probe positions ‐ axial (folded) or at 90°, 180° or 270°
• Even difficult‐to‐reach surfaces such as inside and outside diameters are accessible.
• Integrated data output for SPC‐processing units that is compatible with the most common data processing systems.

Technical Data: