Shoulder Location Gages

Thread Check Inc. offers the Gagemaker-DG-1000-onPartOur digital depth gage for inspecting the location of internal and external shoulder and grooves from the face of pin and box connections or other datum surfaces. The DG-1000 Series is available with the standard base, a 12″ base, and a 20″ base. These gages are available in ranges: 0 – 8”, 0 – 12″, 0 – 18″, and 0 – 24″.

The Gagemaker standard gage (DG-1000 Series) is supplied with a 7” extension arm and a 0° and 45° contact point holder for use with any #4-48 threaded contact point (one .072″ contact point (T072) supplied unless otherwise requested). Longer extension arms and other contact point configurations and adapters are available upon request. The 12″ (DG-1200 Series) and 20″ (DG-2000 Series) gages include one double sided blade contact instead of a contact point and a contact point holder.

Gagemaker Digital depth gages do not require setting standards. The gage is preset to zero on any flat surface and then applied to the product. The actual length measurements display on the gage’s digital readout.

Features

Inspect internal an external shoulder and groove locations.
Uses an interchangeable contact point or blade that can service many different applications.
Inch/metric conversion with digital readout
Digital readout with .0005″/.01 mm resolution and SPC Output


Thread Check has a team of technical experts that are ready to help you with all your gauging and measurement requirements. Contact us via email at info@threadcheck.com or call us at 800 767 7633

Available Shoulder Location Gages

Thread Check Inc. offers the Gagemaker-DG-1000-onPartOur digital depth gage for inspecting the location of internal and external shoulder and grooves from the face of pin and box connections or other datum surfaces. The DG-1000 Series is available with the standard base, a 12″ base, and a 20″ base. These gages are available in ranges: 0 – 8”, 0 – 12″, 0 – 18″, and 0 – 24″.

The Gagemaker standard gage (DG-1000 Series) is supplied with a 7” extension arm and a 0° and 45° contact point holder for use with any #4-48 threaded contact point (one .072″ contact point (T072) supplied unless otherwise requested). Longer extension arms and other contact point configurations and adapters are available upon request. The 12″ (DG-1200 Series) and 20″ (DG-2000 Series) gages include one double sided blade contact instead of a contact point and a contact point holder.

Gagemaker Digital depth gages do not require setting standards. The gage is preset to zero on any flat surface and then applied to the product. The actual length measurements display on the gage’s digital readout.

Features

Inspect internal an external shoulder and groove locations.
Uses an interchangeable contact point or blade that can service many different applications.
Inch/metric conversion with digital readout
Digital readout with .0005″/.01 mm resolution and SPC Output

Thread Check has a team of technical experts that are ready to help you with all your gauging and measurement requirements. Contact us via email at info@threadcheck.com or call us at 800 767 7633

Set Descending Direction
per page
  1. Gagemaker - High resolution 12" base torque shoulder length gage with 6" extension arm and 45deg contact point holder
    Gagemaker - High resolution 12" base torque shoulder length gage with 6" extension arm and 45deg contact point holder
    High resolution 12" base torque shoulder length gage with 6" extension arm and 45deg contact point holder More Info
  2. Gagemaker - 12" base torque shoulder length with 6" extension arm and 45deg contact point holder
    Gagemaker - 12" base torque shoulder length with 6" extension arm and 45deg contact point holder
    12" base torque shoulder length with 6" extension arm and 45deg contact point holder More Info
  3. Gagemaker - High resolution 6" base torque shoulder length gage with 6" extension arm and 45deg contact point holder
    Gagemaker - High resolution 6" base torque shoulder length gage with 6" extension arm and 45deg contact point holder
    High resolution 6" base torque shoulder length gage with 6" extension arm and 45deg contact point holder More Info
  4. Gagemaker - 6" base torque shoulder length gage with 6" extension arm and 45deg contact point holder
    Gagemaker - 6" base torque shoulder length gage with 6" extension arm and 45deg contact point holder
    6" base torque shoulder length gage with 6" extension arm and 45deg contact point holder More Info
  5. Gagemaker - 45deg Contact Point Holder for DG-1008 and DG-1012
    Gagemaker - 45deg Contact Point Holder for DG-1008 and DG-1012
    45deg Contact Point Holder for DG-1008 and DG-1012 More Info
  6. Gagemaker - Groove Locator - .100" thick for DG-1008 and DG-1012
    Gagemaker - Groove Locator - .100" thick for DG-1008 and DG-1012
    Groove Locator, .100" thick for DG-1008 and DG-1012 More Info
  7. Gagemaker - Double Sided Blade Contact for 18 and 24 inch range DG-1200/2000
    Gagemaker - Double Sided Blade Contact for 18 and 24 inch range DG-1200/2000
    Double Sided Blade Contact for 18 and 24 inch range DG-1200/2000 More Info
  8. Gagemaker - Double Sided Blade Contact for 8 and 12 inch range DG-1200/2000
    Gagemaker - Double Sided Blade Contact for 8 and 12 inch range DG-1200/2000
    Double Sided Blade Contact for 8 and 12 inch range DG-1200/2000 More Info
  9. Gagemaker - Blade Contact for 18 and 24 inch ranges for DG-1200/2000
    Gagemaker - Blade Contact for 18 and 24 inch ranges for DG-1200/2000
    Blade Contact for 18 and 24 inch ranges for DG-1200/2000 More Info
  10. Gagemaker - Blade Contact for 8 and 12 inch ranges for DG-1200/2000
    Gagemaker - Blade Contact for 8 and 12 inch ranges for DG-1200/2000
    Blade Contact for 8 and 12 inch ranges for DG-1200/2000 More Info
Set Descending Direction
per page
By clicking "I Agree", you agree to our Terms and that you have read our Data Use Policy.