Morse Cylindrical Taper Plug Without TANG
Details
Morse tapers are used on a variety of tools and specifically on the shanks of twist drills. The taper on different sizes varies slightly but is approximately 5/8 inches per foot. Thread Check Inc. designs and builds custom tapered plug gages for a wide range of industries and applications. Other types of tapers include medical luer tapers, Cat V Flange Tapers and Steep Machine Tapers.
| SKU | Taper # | Large End | Small End | Length | TPF | Each |
|---|
| MT#0-P | 0 | .3561" | .2520" | 2.00" | .62460" | $361.00 | MT#1-P | 1 | .4750" | .3690" | 2 1/8" | .59858" | $295.00 | MT#2-P | 2 | .7000" | .5720" | 2 9/16" | .59941" | $320.00 | MT#3-P | 3 | .9380" | .7780" | 3 3/16" | .60235" | $352.00 | MT#4-P | 4 | 1.2310" | 1.0200" | 4 1/16" | .62326" | $403.00 | MT#4-1/2-P | 4 1/2 | 1.500" | 1.2660" | 4 1/2" | .62400" | $475.00 | MT#5-P | 5 | 1.7480" | 1.4750" | 5 3/16" | .63151" | $534.00 | MT#6-P | 6 | 2.4940" | 2.1160" | 7 1/4" | .62565" | $681.00 | MT#7-P | 7 | 3.2700" | 2.7500" | 10 | .62400" | $724.00 |
|---|
